|
|
|
|
HORNET XD™ CNC Cutting Machine
 Request
a HORNET XD quote
...................................................................
 HORNET XD literature (1.0
MB PDF)..........................................................
 HORNET XD
slide presentation (1.1 MB PDF)
.............................................
 HORNET
XD
video (41.5 MB WMV)
............................................................
|
|
|
|
|
HORNET XD delivers precision dual side drive plasma and oxy-fuel cutting
performance.
Like all Retro Systems machines, the HORNET XD includes standard features normally
offered only as options on larger more expensive machines.
Plasma process
control for all plasma systems is included with the Hypertherm MicroEDGE
CNC control.
REMOTE DIAGNOSTICS over the internet is also included - and it's FREE.
Select from air, oxygen or high definition plasma systems with output from 40 to 400 Amps for production cutting
up to 2" (50mm).
Machines may be configured with up to (4) oxy-fuel torches for cutting
up to 3" (75mm). Mechanical and plasma plate marking may also be added.
The HORNET XD dual side drive
model is available in 5 ft, 6
ft, 8 ft, 10 ft and 12 ft widths. Lengths of over 60 ft can be supplied.
|
|
|
|
|
HORNET XD™ Features
All Steel Frame Construction
Hypertherm MicroEDGE CNC Control
with Phoenix motion control softwareSteel
Cross Axis Beam with Dual Linear Ways
Structural "I" Beam Rail Support System with Flame Hardened Tee Rail
600 or 1,100 Watt AC Servo Drive System (model dependent)
Flexible Cable Carriers for All Cables and Hoses
OPTIONS:
Up to (2) Plasma systems from 40 to 400A
RSVS-151 Plasma Torch Height Control
RSVS-5 Plasma Torch Height Control
Up to (4) motorized Oxy-fuel torch stations
Basic Oxy-fuel Gas Manifold
Heavy Duty Hi/Low Pre-Heat Oxy-fuel Gas Manifold
Zoned Side-Draft air exhaust table
Dust Collection Systems
Water Tables with Adjustable Water Level
|
|
|
|
|
|
|
|
|
|
 CNC Control Software Features
Microsoft Windows XP® - Embedded Version
Hypertherm Phoenix CNC software - NEW Version 8.5
Plasma Process CUT CHARTS
NEW REMOTE HELP via the internet
NEW CUT PRO WIZARD
NEW Customizable Process Tables
CAD file to CNC file converter & Row and Column nesting - INCLUDEDEnlarged screen elements with Pop-Up Keyboards and Number pads
Shape library with 68 shapes, allowing more than 300 parts to be programmed
Shape Wizard allows to construct / edit parts on screen
Dynamic kerf compensation
Restart cutting ahead or behind current position or move to exact pierce number
Move forward or backward on path
Watch Windows for speed, position, consumable life, process data, and status messages
On-line HELP function
|
|
|
|
|
HYPERTHERM Plasma THC Technology
SENSOR THC electronics and Retro Systems Lifters:
Up to 1,000 IPM (25.4m/min) vertical positioning speed
Pierce Height Sensing using Ohmic or Position Error Stall Detection
Maintains torch to plate height during cut via voltage regulation
6", 10" or 14" (150mm, 250mm & 350mm) stroke travel for torch positioning
50-300 VDC Arc Voltage Range in .1 volt increments
Pneumatic plasma torch collision mount with E-STOP to CNC
THC Control Parameters:
Transfer height
Pierce height
Pierce time
Cutting height
Cutting voltage
Retract height after cut
Click here to open the RSVS-151 Torch Height Control data sheet
Click here to open the RSVS-5 Torch Height Control data sheet
Click here to open the Plasma Torch Collision Mount data sheet
|
|
|
|
|
Recommended Plasma Systems
Retro Systems suggests the Hypertherm mechanized plasma cutting products listed below
for use with our HORNET XD model. Other products may be offered depending
upon your application.
AIR PLASMA:
Powermax1000
Powermax1250
Powermax1650
OXYGEN PLASMA:
MAX200
LONG LIFE OXYGEN PLASMA:
HSD130
HT2000 HySpeed
HIGH DEFINITION PLASMA:
HPR XD Family brochure
HPR130XD
HPR260XD
HPR400XD
Click here to contact us for a proposal.
|
| |
|
|
|
)
)
)
