|
|
|
|
MEGA HORNET™ 3000 CNC Cutting Machine
 Request
a MEGA HORNET 3000 quote
........................................................
 MEGA HORNET literature
(1.5MB PDF) .........................................................
 MEGA HORNET
3000
slide presentation (1.8 MB PDF)
..................................
|
|
|
|
|
 MEGA HORNET
3000 sets a new higher standard for accuracy, power and
reliability in a heavy duty CNC profile cutting machine. MEGA HORNET 3000’s huge
frame and massive servo drives will deliver decades of reliable
service to shipyards, service centers and manufacturers.
A welded and stress relieved double box gantry beam and fabricated steel end trucks enable the
MEGA HORNET 3000 to span up to 30 feet (6.1m) and carry up to 12 cutting and marking processes.
The MEGA HORNET 3000 includes the Hypertherm EDGE Pro™ CNC
control with support for True Hole™
technology. MEGA HORNET 3000 incorporates industry’s most reliable AC servo amplifiers and servo motors, precision planetary gearboxes, precision ground cross axis linear ways and a heavy duty machined floor mounted rail system.
MEGA HORNET 3000 is designed for shipyards, service centers, contract shops and manufacturers
and is available in widths from 10 ft to 30
ft. Lengths of over
200 ft or more can be supplied.
MEGA HORNET 3000 Standard Features
12" x 16" (300mm x 400mm) Heavy Wall Double-Box Front Beam
8" x 8" (200mm x 200mm) Heavy Wall Rear Beam
Fabricated & Reinforced Steel End Trucks
Hypertherm Automation EDGE Pro™ CNC Control with SERCOS Interface
10 HP AC Servo Motors & Drive Amplifiers
Slave Carriage Stainless Steel Band Drive
5 Arc Minute Planetary Gear Heads
600 IPM Contouring (15.24m/min) / 1,000 IPM Rapid Traverse (25.4m/min)
Triple Machined Floor Mounted Rail System
Dual Linear Ways on Cross Axis
Flexible Cable Carriers on Cross Axis
Main Carriage for (1) Plasma station, (1) Oxy-fuel station & (1) Marker station
|
|
|
|
|
OPTIONS
Up to (4) Plasma Systems - Conventional or High Definition
Up to (2) Contour Bevel SystemsUp to (4) Plasma Torch Height Control Stations
Up to (4) Plasma Torch Height Control Stations
Up to (12) Oxy-fuel stations - Straight cutting
Up to (2) Oxy-fuel Infinitely Rotating Triple Bevel stations
Heavy Duty Hi/Low Pre-Heat Oxy-fuel Gas Manifold
Water Tables with Adjustable Water Level
Integrated Zoned & Ducted air exhaust table
Dust Collection Systems
|
|
|
|
|
|
 |
|
|
EDGE
Pro CNC Control |
|
|
|
|
|
|
|
|
|
|
|
EDGE Pro CNC Control Features
| Operating system |
Windows® XPe |
| Hard drive |
SATA drive |
| Display |
15" glass touchscreen (surface acoustic wave technology) |
| Memory |
≥1GB |
| USB interface |
Two USB 2.0 ports |
| Dimensions |
435 mm (17.125") W; 463 mm (18.22") H; 316 mm (12.43") D |
| Temperature range |
-10° C to 40° C ambient (14° F to 104° F ambient) |
| Input voltage and hertz |
100 – 240VAC, 50/60 Hz |
|
|
|
|
|
HYPERTHERM Plasma THC Technology
SENSOR THC electronics and Retro Systems RSVS-5 Lifter:
1,000 IPM (25.4m/min) vertical positioning speed
Pierce Height Sensing using Ohmic or Position Error Stall Detection
Maintains torch to plate height during cut via voltage regulation
14" (350mm) stroke travel for torch positioning
50-300 VDC Arc Voltage Range in .1 volt increments
Pneumatic plasma torch collision mount with E-STOP to CNC
THC Control Parameters:
Transfer height
Pierce height
Pierce time
Cutting height
Cutting voltage
Retract height after cut
Click here to open the RSVS-5 Torch Height Control data sheet
Click here to open the Plasma Torch Collision Mount data sheet
|
|
|
|
|
Recommended Plasma Systems
Retro Systems suggests the Hypertherm mechanized plasma cutting products listed below
for use with our MEGA HORNET 3000 model. Other products may be offered depending
upon your application.
OXYGEN PLASMA:
MAX200
LONG LIFE OXYGEN PLASMA:
HSD130
HT2000 HySpeed
HIGH DEFINITION PLASMA:
HPR XD Family brochure
HPR130XD
HPR260XD
HPR400XD
Click
here
to contact us for a proposal.
|
| |
|
|
|
)
)
)
)
