|
|
|
|
Mechanized Plasma Cutting Equipment
The mechanized plasma cutting products listed below are those we normally
promote for use with our CNC profile cutting machines. Included are each
system's specifications and the PDF files for literature and CUT CHARTS.
|
|
|
|
|
Hypertherm Mechanized Plasma Systems
|
|
|
|
|
Powermax45
The Hypertherm Powermax45 is a 45 amp conventional air plasma cutting system
with a recommended maximum machine cutting thickness of 3/8" (10mm). This plasma system is normally
sold with our MINI HORNET model machine.
Powermax45 literature PDF file
Powermax45 cut chart
PDF file
|
|
|
|
|
Powermax1000
The Hypertherm Powermax1000 is a 60 amp conventional air plasma cutting system
with a recommended machine cutting thickness of 3/8" (10mm) and a maximum
machine cutting thickness of 1/2" (12mm). This plasma system is normally
sold with our MINI HORNET or HORNET model machines.
Powermax1000
literature PDF file
Powermax1000
cut chart
PDF file
|
|
|
|
|
Powermax1250
The Hypertherm Powermax1250 is an 80 amp conventional air plasma cutting system
with a recommended machine cutting thickness of 3/8" (10mm) and a maximum
machine cutting thickness of 5/8" (16mm). This plasma system is normally
sold with our MINI HORNET or HORNET model machines.
Powermax1250
literature PDF file
Powermax1250
cut chart
PDF file
|
|
|
|
|
Powermax1650
The Hypertherm Powermax1650 is a 100 amp conventional air plasma cutting system
with a recommended machine cutting thickness of 1/2" (12mm) and a maximum
machine cutting thickness of 3/4" (19mm). This plasma system is normally
sold with our MINI HORNET or HORNET model machines.
Powermax1650
literature PDF file
Powermax1650
cut chart
PDF file
|
|
|
|
|
MAX200
The Hypertherm MAX200 is a 200 amp heavy duty air plasma cutting system with a recommended machine cutting thickness of 1"
(25mm)and a maximum capacity of 2" (50mm). This plasma system is
available on either the HORNET, SUPER HORNET or ULTRA HORNET models.
MAX200
literature PDF file
MAX200
cut chart PDF file
|
|
|
|
|
HT2000 HySpeed
The Hypertherm HT2000 HySpeed is a 200 amp heavy duty LongLife
oxygen plasma cutting system with a recommended machine cutting thickness of 1"
(25mm)and a maximum capacity of 1-1/2" (32mm). This plasma system is
available on the dual side drive HORNET, SUPER HORNET or ULTRA HORNET model.
HT2000
literature PDF file
HT2000
cut chart PDF file
HT2000 HySpeed cut chart PDF file
HT2000 HySpeed
Instruction Manual PDF file
|
|
|
|
|
HSD130
The Hypertherm HSD130 is a 130 amp LongLife
oxygen plasma cutting system with a recommended machine cutting thickness of 5/8"
(16mm)and a maximum capacity of 1" (25mm). This plasma system is available on
either the MINI HORNET, MINI HORNET HD, HORNET, SUPER HORNET or ULTRA HORNET models.
HSD130
literature PDF file
HSD130 cut chart PDF file
HSD130 LHF Instruction Manual PDF file
HSD130 RHF Instruction Manual
PDF file
|
|
|
|
|
HPR130
The Hypertherm HPR130
is a 130 amp high definition plasma cutting system with a "virtually dross-free"
cutting range from thin gage to 5/8" (16mm) and production pierce capacity of 1"
(25mm). When starting from the edge of the plate, the maximum capacity is up to
1-1/2" (38mm). his plasma system is available on the MINI HORNET HD, SUPER HORNET, ULTRA HORNET
or MEGA HORNET models.
HPR130
literature PDF file
HPR130 Manual Process
cut chart PDF file
HPR130 Auto Process
cut chart PDF file
|
|
|
|
|
HPR260
The Hypertherm HPR260
is a 260 amp high definition plasma cutting system with a "virtually dross-free"
cutting range from thin gage to 1-1/4" (32mm). This plasma system is available
on the SUPER HORNET, ULTRA HORNET or MEGA HORNET models.
HPR260
literature PDF file
HPR260 Manual Process cut chart PDF file
HPR260 Auto Process cut chart PDF file
Detailed information on the HPR260.
|
|
|
|
|
HPR400XD®
The Hypertherm HPR400 XD
is a 400 amp high definition plasma cutting system with a pierce capacity of 2"
(50mm) and a
cutting range from 0.020" (.5mm) to 3.2" (80mm). This plasma system is available on the SUPER HORNET,
ULTRA HORNET or MEGA HORNET models.
HPR400XD Auto Process
cut chart PDF file
HPR400XD literature PDF file
HPR400XD Web page
|
|
|
|
|
HT4400 - available
until August 2009
The Hypertherm HT4400 is a 400 amp heavy duty LongLife
oxygen plasma cutting system with a recommended machine cutting thickness of
1-1/4" (32mm). This plasma system is available on the SUPER HORNET, ULTRA HORNET
or MEGA HORNET models.
HT4400
literature PDF file
HT4400
cut chart PDF file
|
|
|
|
|
ArcWriter™
The Hypertherm ArcWriter is a dual gas, variable output power, plasma marking, scoring and punching system
designed to leave temporary or permanent identification marks on metal surfaces.
This plasma system is available on the HORNET, SUPER HORNET, ULTRA HORNET or
MEGA HORNET
models.
ArcWriter
literature PDF file
ArcWriter
Arc Writer technical overview PDF file
|
|
|
|
|
Hypertherm Plasma Torch Height Controls
|
|
|
|
|
SENSOR™ PHC
The SENSOR™ PHC is a precision plasma torch height control system specifically designed for conventional plasma systems. The
SENSOR PHC package even includes an integrated magnetic torch mount break away!
The machine operator sets Initial Pierce Height, Cut Height and Arc Voltage on the Control Console. SENSOR PHC fully automates the cutting process.
SENSOR PHC will significantly increase the productivity and profitability of your shape cutting operation.
SENSOR PHC
datasheet PDF file
|
|
|
|
|
SENSOR™ THC
The SENSOR™ THC is a full featured precision plasma torch height control
system specifically designed to integrate with Hypertherm CNC shape cutting
controls. The SENSOR THC incorporates the latest advancements in system
integration and hardware reliability. With integrated SoftMotion and closed-loop
servo control, the SENSOR outperforms all other THCs. The SENSOR
is easy-to-use and will significantly increase the productivity and
profitability of your shape cutting operation.
The machine operator selects Material Type, Process Current, Plasma/Shield and
Material Thickness in the CNC control Cut Chart screen. The Phoenix CNC
software retrieves cutting parameters from Look-Up Tables stored within the CNC
control. Cutting speed and THC parameters are set and automatically maintained
during the cutting cycle. When interfaced to a Hypertherm
HyPerformance Auto Process plasma system, the CNC control automatically sets
and maintains the correct plasma and shield gas flows as well.
Retro Systems offers the SENSOR torch height control electronics with three different lifters
- RSVS-150, RSVP-151 and RSVS-5.
Click here to open the SENSOR
with RSVS-150 data sheet
Click here to open the SENSOR
with RSVS-151 data sheet
Click here to open the SENSOR
with RSVS-5 data sheet
|
|
|
|
|
KALIBURN Mechanized Plasma Systems
|
|
|
|
|
Spirit150a
The KALIBURN Spirit150a is an Auto
Process Control 150 Amp high current density plasma cutting system with a
dross-free cutting range from thin gage to 3/4" (20mm) and production pierce
capacity of 3/4" (20mm). When starting from the edge of the plate, the maximum
capacity is up to 1-1/2" (38mm).This plasma system is available on the MINI
HORNET HD, HORNET,
SUPER HORNET, ULTRA HORNET or MEGA HORNET
models.
Spirit150a™
literature PDF file
Spirit150a™
cut chart PDF file
|
|
|
|
|
Spirit200a
The KALIBURN Spirit200a is an Auto Process Control 200 Amp high current density plasma cutting system with
a dross-free cutting range from thin gage to 1" (25mm) and production pierce
capacity of 1" (25mm). When starting from the edge of the plate, the maximum
capacity is up to 2" (50mm).
This plasma system is available on the HORNET, SUPER HORNET, ULTRA
HORNET or MEGA HORNET
models.
Spirit150a™
literature PDF file
Spirit150a™
cut chart PDF file
|
|
|
|
|
Spirit275a
The KALIBURN Spirit275a is an Auto
Process Control 275 Amp high current density plasma cutting system with a
dross-free cutting range from thin gage to 1-1/4" (32mm) and production pierce
capacity of 1-1/4" (32mm). When starting from the edge of the plate, the maximum
capacity is up to 2" (50mm). This plasma system is available
on the HORNET, SUPER HORNET, ULTRA HORNET or MEGA HORNET
models.
Spirit275a™
literature PDF file
Spirit275a™
cut chart PDF file
|
|
|
|
|
KALIBURN Plasma Torch Height Controls
|
|
|
|
|
Inova™
The KALIBURN Inova torch height control enables the
machine operator to quickly and accurately set plasma process variables from the
remote Touch Screen control.
Inova
literature PDF file
|
|
|
|
|
Thermal Dynamics Mechanized Plasma Systems
|
|
|
|
|
Auto-Cut™ 100
The Thermal Dynamics® Auto-Cut™ 100 delivers premium cut performance on both mild steel and non-ferrous materials. The power supply is designed for reliable, low cost operation.
Features like the XT™-301 consumable parts cartridge and the Machine Status Message Center make the Auto-Cut™ 100 easy to operate.
Auto-Cut™ 100
literature PDF file
Auto-Cut™ 100
cut chart PDF file
|
|
|
|
|
Auto-Cut™ 200
The Thermal Dynamics® Auto-Cut™ 200 delivers premium cut performance on both mild steel and non-ferrous materials. The power supply is designed for reliable, low cost operation.
Features like the XT™-301 consumable parts cartridge and the Machine Status Message Center make the Auto-Cut 200 easy to operate.
Auto-Cut™ 200
literature PDF file
Auto-Cut™ 200
cut chart PDF file
|
|
|
|
|
Auto-Cut™ 300
The Thermal Dynamics® Auto-Cut™
300 delivers premium cut performance on both mild steel and non-ferrous materials. The power supply is designed for reliable, low cost operation.
Features like the XT™-301 consumable parts cartridge and the Machine Status Message Center make the Auto-Cut
300 easy to operate.
Auto-Cut™ 300
literature PDF file
Auto-Cut™ 300 cut chart PDF file
|
|
|
|
|
Auto-Cut™ 200 O2
The Thermal Dynamics® Auto-Cut 200 O2
is an oxygen plasma cutting system that delivers sophisticated technology and
premium cut performance in a simple to use design for production environments cutting ferrous and non-ferrous materials.
Auto-Cut™ 200
O2
literature PDF file
Auto-Cut™ 200
O2
cut chart PDF file
|
|
|
|
|
Auto-Cut™ 300 O2
The Thermal Dynamics® Auto-Cut 300 O2
is an oxygen plasma cutting system that delivers sophisticated technology and
premium cut performance in a simple to use design for production environments cutting ferrous and non-ferrous materials.
Auto-Cut™ 300
O2
literature PDF file
|
| |
|
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)