|
|
|
|
ULTRA HORNET™ CNC Cutting Machine
 Request
an ULTRA HORNET quote
.......................................................
 ULTRA HORNET
literature
(1.0 MB PDF) ................................................
 ULTRA HORNET presentation (6.5 MB PDF)
...........................................
|
|
|
|
|
 The ULTRA HORNET is designed for heavy duty high definition and
conventional CNC plasma cutting
as well as heavy duty oxy-fuel cutting. Innovative heavy duty design and superior components enable customers to
select up to four plasma cutting systems with up to 400 amp output for production cutting
up to 1-1/4" (32mm). Up to eight oxy-fuel torches and one plate marker may also be added.
Retro Systems incorporates the Full Suite of Hypertherm® automation products for Total System Integration.
By featuring a Hypertherm EDGE Pro™ CNC controller and a Hypertherm torch height control,
we ensure the highest level of plasma
system performance. When used with the Hypertherm SENSOR plasma torch height
control, the Phoenix software in the Hypertherm CNC controller prompts the operator to select
Material Type, Thickness and Process Amperage. The answers to these questions set and control the
plasma process and motion control variables throughout the cutting job. If
interfaced to a Hypertherm HyPerformance HPR130XD, HPR260XD or HPR400XD Auto Process plasma system,
the EDGE Pro also automatically sets and maintains all plasma process
parameters.
ULTRA HORNET CNC cutting machines are available in 6, 8, 10, 12, 14 or 16 ft effective
cutting widths. Lengths of 150 ft or more can be supplied.
ULTRA HORNET Standard Features
All Steel Frame Construction
Hypertherm EDGE Pro CNC Control with Phoenix motion
control software
SERCOS™ Fiber Optic Digital Drive Interface
1,200 Watt (1.6 HP) AC Servo Drive System
Structural "I" Beam Rail Support System with Flame Hardened Tee Rail
Steel Cross Axis Beam with Dual Linear Ways
Flexible Cable Carriers for All Cables and Hoses
|
|
|
|
|
OPTIONS:
Up to (4) Plasma Systems - Conventional or High Definition
Up to (4) Plasma Torch Height Control Stations
Up to (8) Oxy-fuel stations - Straight cutting
Heavy Duty Hi/Low Pre-Heat Oxy-fuel Gas Manifold
Water Tables with Adjustable Water Level
Integrated Zoned & Ducted air exhaust table
Dust Collection Systems
|
|
|
|
|
|
 |
|
|
EDGE
Pro CNC Control with
(12) station operator console |
|
|
|
|
|
|
EDGE Pro CNC Control Features
| Operating system |
Windows® XPe |
| Hard drive |
SATA drive |
| Display |
15" glass touchscreen (surface acoustic wave technology) |
| Memory |
≥1GB |
| USB interface |
Two USB 2.0 ports |
| Dimensions |
435 mm (17.125") W; 463 mm (18.22") H; 316 mm (12.43") D |
| Temperature range |
-10° C to 40° C ambient (14° F to 104° F ambient) |
| Input voltage and hertz |
100 – 240VAC, 50/60 Hz |
|
|
|
|
|
HYPERTHERM Plasma THC Technology
SENSOR THC electronics and Retro Systems RSVS-5 Lifter:
1,000 IPM (25.4m/min) vertical positioning speed
Pierce Height Sensing using Ohmic or Position Error Stall Detection
Maintains torch to plate height during cut via voltage regulation
10" or 14" (250mm & 350mm) stroke travel for torch positioning
50-300 VDC Arc Voltage Range in .1 volt increments
Pneumatic plasma torch collision mount with E-STOP to CNC
THC Control Parameters:
Transfer height
Pierce height
Pierce time
Cutting height
Cutting voltage
Retract height after cut
Click here to open the RSVS-5 Torch Height Control data sheet
Click here to open the Plasma Torch Collision Mount data sheet
|
|
|
|
|
Recommended Plasma Systems
Retro Systems suggests the Hypertherm mechanized plasma cutting products listed below
for use with our ULTRA HORNET model. Other products may be offered depending
upon your application.
OXYGEN PLASMA:
MAX200
LONG LIFE OXYGEN PLASMA:
HSD130
HT2000 HySpeed
HIGH DEFINITION PLASMA:
HPR XD Family brochure
HPR130XD
HPR260XD
HPR400XD
Click
here
to contact us for a proposal.
|
| |
|
|
|
)
)
